Clear Lacquer Leather Finish PU Lacquer Top Coat Sealer
- New Improved Version
- Higher Waterproof Properties
- Higher UV Protection
- Luxurious Feel
An extremely hard wearing and scuff resistant PU Clear Lacquer Leather Finish. Clear Lacquer Leather finish is a clear coat sealer / lacquer designed to be applied over the top of the Leather colourant, to seal in the top coat, giving the finish an extremely hard wearing surface, protecting it from grime, stains and dirt.
Easy to apply with a sponge or spray application, with amazing results, producing a beautiful Gloss, Satin or Matt Clear Lacquer Leather Finish.
· Very Hard Wearing – Seals colour in, more importantly holds it there!
· Extremely flexible giving a natural soft touch.
· Clear finish comes in a matt and gloss or satin, this then enables you to mix to any finish desired.
· Water Based – Non Hazardous & Non Flammable
· Giving a scuff & scratch resistant finish
This clear coat Lacquer Leather Finish has been designed to seal colour in after applying colours to a leathers surface. It also feels soft and natural on the leather, it does not make leather feel and look artificial in anyway. In fact it far improves the touch and texture on leather, achieving a very smooth, soft, silky feel that is very natural and so realistic you won’t be able to tell them apart. The clear coat Lacquer Leather Finish is an Ideal partner for manufacturers of antique finished leathers. Where the coloured finish is rubbed off to create a two tone effect coloured look and finish.
- Available ready to use
- Just spray it on if using an airbrush
- Simple and easy to apply with a sponge
- Clear Lacquer Leather Finish
The Clear Lacquer Leather Finish will greatly increase the leathers life span. Any questions please don't hesitate to e-mail us on: email@example.com
The clear coat leather lacquer finish is an extremely flexible clear coating that is applied to your leather after carry out a colour repair.
Its very easy to apply, this can be done with a sponge so anyone wanting to carry out a diy leather repair job at home can do this quickly and easily.
You just dab on the clear coat lacquer being careful not to overload the sponge so not to create a froth on the surface.
Apply two to three coats maximum allowing to dry between each coating, you can speed this up with a hair drier.
Either between the first coating or second coating lightly sand with 7000 grit paper to give a silky feel to the leather before apply the third coating of the clear leather lacquer finish.
If you wish to spray this on, this can be done keep the spraying pressure down to about 15psi, and spray about 12 to 15 inches away from the surface.
Spray in even over lapping motions, ensuring you have covered the area fully, dry with a hair drier between coats.
If applying two coatings, when the first coating is dry lightly sand this with 700 grit paper to produce a luxurious soft finish that looks just stunning.
If applying three coatings, when the second coating is dry lightly sand this with 700 grit paper to produce a luxurious soft finish that looks just stunning.